It can be challenging to choose a suitable toilet for your bathroom. The first thing to consider is your budget. Also, how much will the new toilet cost to remodel your bathroom? There are many other factors to consider. There are many options for sizes and configurations so you can find the right commode to fit your needs. If you're unsure about the parameters that you should consider when buying a toilet, this guide will help you make an informed decision.
Take a look at the Toilet Configuration
Before you get a new toilet, the first thing to do is measure your bathroom. The rough-in distance is the distance between the floor drains and the wall. The rough-in distance should be between 12 and 14 inches. However, it can be adjusted to fit any space. After you have determined the final length, you can choose the shape and height of your toilet, as well as the style.
Toilet Bowl Shape
Elongated Bowls
For extra comfort, elongated toilets have a bowl that extends further towards the front. This toilet takes up more space in your bathroom but is excellent if you have more space.
Round Bowls
This type of toilet bowl, as its name implies, has a compact and round design. This toilet bowl is ideal for small bathrooms because it takes less space.
Toilet Height
Standard toilets are 15 inches above the floor. This is the ADA-approved height. The seat ring or rim adds 1 to 1 1/2 inches. If you have more space, you might consider a taller toilet. It can be as high as 17 inches.
Toilet Style
Two-Piece Toilet
Two-piece toilets have a separate tank bowl and are considered two distinct units. This is the most popular and cost-effective option for households. There are many options on the market for bathroom replacement parts, which makes it easier to remodel your bathroom.
One-Piece Toilet
One-piece toilets are a single unit that fuses the bowl and tank. Although this is more expensive, it takes up less space. This is easier to clean and will give your bathroom a sleek appearance.
Wall-Hung Toilets
As the name implies, this type of toilet is mounted directly on the wall and does not require a base. This toilet is very convenient for people who use wheelchairs or walkers. The cost is higher, and drainage fixtures must be installed on the wall. It is easy to clean.
.jpg)
Water-Saving Toilets
The current American regulations established after 1994 limit water consumption to 1.6 gallons per flush (GPF). This is half the amount of water used in older models. This is an important aspect to consider when choosing a toilet for your bathroom. Modern hydraulic systems not only conserve water but can also lower your water bills. Modern flushing technology effectively cleans toilets and clears clogs. Look for models manufactured after 1994, and have a low-volume flushing mechanism.
High-Efficiency Toilets
HETs have a flush rate of 1.28 GPF and provide 20% more water savings than toilets with just 1.6 GPF.
Ultra-High Efficiency Toilets (UHETs).
UHETs offer a higher flush rate of up to 1.0 GPF, ensuring maximum water conservation.
Dual-Flush Toilets
Dual flush toilets allow you to select the amount of water used per flush. Two buttons are located over the tank, allowing you to choose between a partial flush for liquid waste or a full flush with solid waste.
If you are in doubt, look for models that promise high efficiency. This means the model can remove waste and clogs with minimal water consumption. Higher numerical values indicate the best performance in terms of waste disposal.
Flushing Mechanisms
Gravity-Feed Toilets
The flush valve here is controlled by gravity. Gravitation forces the water from the tank into the bowl, thereby removing any waste through the connected drain pipes. They are quieter than pressure-assisted models and require less water pressure.
Pressure-Assisted Toilets
This type of toilet works by creating pressure when air is compressed within the tank. The excessive pressure pushes out the waste through the drain pipe. Functioning properly requires high water pressure --minimum 25 pounds/square inch. While they use less water, pressure-assisted toilets are quieter than gravity-feed models.
Additional Modern Innovations
Trap Methods
The bends at the back of the toilet bowl are called trapways. These areas are most difficult to clean. There are many options available for hidden tramways. These have a smooth surface that covers the area where the trapway would generally be. You can also find skirted trapways with a straight line between the toilet's front and back. These options make it easier to clean your bathroom to remain sparkling and clean.
Flushing
The sensor allows you to flush the toilet using touch-less technology. The button doesn't have to be touched, you can wave your hand, and the waste will automatically be flushed.
Color
Commodes can now be purchased in many colors, including classic white. You should choose a color that matches the bathroom decor and doesn't fade with time.
Water Supply Line
Instead of the standard chrome-plated copper water supply lines, you can opt for a flexible, braided stainless steel water supply line. This material will reduce the likelihood of future repairs and the possibility of frequent leaks. A water shutoff valve can be installed so that if your toilet overflows, you can cut off the water supply to the toilet without affecting the rest of the house.
Conclusion
People find that a toilet's higher price doesn't necessarily mean it is more efficient. A mid-priced toilet can help you conserve water while still delivering the highest efficiency. Keep these key factors in mind as you make your final choice.
No comments:
Post a Comment